Tyre Couplings

Fenner Tyre couplings provide all the desirable features of an ideal flexible coupling, including Taper Lock fixing. The Fenner Tyre coupling is a "torsionally elastic" coupling offering versatility to designers and engineers with a choice of flange combinations to suit most applications.

The flanges are available in either F or H version Taper Lock fitting or bored to size B. With the addition of a spacer flange, the coupling can be used to accommodate standard distance between shaft ends and facilitate pump maintenance.

Fenner Tyre couplings can accommodate simultaneous maximum misalignment in all planes without imposing undue loads on adjacent bearings and the excellent shock-absorbing properties of the flexible tyre reduce vibrations and torsional oscillations.

Fenner tyres are available in natural rubber compounds for use in ambient temperatures between -50 C to +50 C. Neoprene rubber compounds are available for use in adverse operating conditions e.g. oil or grease contaminations and can be used in temperatures of - 15O C to + 70O C.

F.R.A.S. tyres are available for use when fire-resistance and antistatic (F.R.A.S.) properties are required.

PX- SERIES

PX Series couplings are light weight tyre type flexible couplings, has less mechanical losses and are economical. These couplings are easy to installl and need no special toolings. Their inspection can be done without dismentalling them. These couplings need no maintenance or lubrication etc., Standard range covers continuous torque uoto 5.500 NM.

 

PH- SERIES

PH Series couplings,in a new sofisticated design, are used to neutralise parellel, axial and angular misallignments upto 8mm., 12mm and 6 degree respectively. It cushions shock loads, absorbs tortional & lateral vibrations.

These couplings consists of punched & slitted tyre firmly bolted with twin hubs and flanges through the hole punched in the tyre, eliminatimg any possibility of the tyre slipping out of the assembly, in all conditions.

 

TC- SERIES

UNIQUE Tyre Type Automatic Flexible Cushion Couplings are used to neutralise parellel axial and angular misallignments, Endfloats singaly or in combination and to absorb vibration and cushion shocks. The heart of UNIQUE couplings is a tyre shaped radially split flexible member made of Neoprene / Nitrile / Natural rubber compounds reinforced with Nylon / Rayon cords. Special construction of flexible member allows it to flex at will in all directions with negligible heat build up / powerloss. Thus long life nor only for coupling but also for connected equipment is assured. These couplings are easy to install. Replacement of the flexible member can also be done quickly and easily. Inspeciton of these coupling can also be done without dismentalling them since there is no moving part no lubrication is required.